Baxter Commercial Appliance Repair

Since Baxter appliances are well made and considered reliable, when one stops working perfectly it’s a shocking experience. The good news is that we’re just a phone call away.

By turning to us whenever one of your commercial appliances needs a little extra care, you ensure that your appliance is about to get the very best. You can look all over Southern California and you won’t find a team of repair experts that better qualified to handle the repairs you require. Each person on our crew handles themselves in a professional manner, is devoted to fixing the problem correctly in a single appointment, and helping you better understand how your appliance works. In additional to handling the actual repair work, the repair tech that handles the work will answer any questions you have and provide helpful advice about the best way to maintain all your Baxter commercial appliances.

We’re determined to make Baxter repairs a pleasant, stress-free experience.

While Baxter appliances are really well designed and should provide you with years and years of problem free use, it’s still important to remember they’re not designed to last indefinitely. Sometimes things wear out and the appliance stops performing as well as it once did. The good news is that when this happens, we’re right here, ready to step in and lend a helping hand.

knowing how to troubleshoot and repair your Baxter washing machine goes a long way towards extending the number of useful years you get out of it.

Worn Water Fill Hoses

A majority of the problems we encounter with Baxter washing machines, is worn out water hoses or hoses that have sprung leaks. 

It’s possible to patch the water hoses yourself, but normally it’s not long before they spring a new leak, so we suggest replacing the entire hose.

 Getting into the habit of checking the hoses every few days means you’ll notice things like cracks and blisters before they turn into full-fledged leaks and flood the place.

If you’re handy, the water hoses are simple enough to replace on your own. Just swing by our shop and pick up whatever you need.

The Washer Rocks to and fro

Seeing a rocking Baxter washer is unsettling and having to listen to the rocking sound during an entire wash cycle is aggravating. The good news is that a rocking and rolling washing machine doesn’t necessarily mean you need emergency washer repairs.

The problem is easily corrected by using your hip to shift the unit back into a more balanced position. It’s also important to make sure you evenly distribute the laundry instead of just dumping onto one side, which is generally what causes the machine to get out of balance in the first place.

You Can’t Turn Your Baxter Washing Machine on

There are multiple reasons why your washing machine won’t turn on. They include that the power cord has come out of the outlet, the door isn’t closing properly, or the unit has a blown internal circuit, electrical shorts, problems with the on off switch, and more. We have a team of Baxter washing machine experts standing by who have the experience needed to identify the root of the problem and correct it.

Soapy Clothing

When you open up your washing machine, you expect to find clean clothing. You don’t expect to find clothes that are covered with a layer of soap suds. Clothing that’s still covered in suds following a wash cycle indicates that 

the rinse water either didn’t enter the basin or the wash water failed to drain. This happens because of:

• Blocked cold water supply hose
• Blocked drain hose
• Kinked supply hoses
• Damaged supply valve

Failure to Agitate

One of the more serious Baxter washer appliance repair problems we encounter is washers that aren’t agitating properly. More often than not, the culprit is the small plastic tab built into the lid. If it’s damaged, the washer doesn’t recognize that the lid is closed, and refuses to do more than fill with water. We correct the issue by installing a new door with a brand new, fully functioning tab.

There are some additional reasons for the lack of agitation, including:

• Broken belt
• Faulty motor

The Washer Doesn’t Spin and Extract Water

There are multiple reasons your washing machine fails to spin during the wash cycle. Including:

• Clothing has gotten jammed and needs to be extracted before the washer can restart
• Broken belt
• Damaged controls

Baxter Commercial Dryer Repair

If you’ve always wanted to try your hand at your own commercial appliance repairs, a Baxter dryer isn’t a bad place to start (provided the unit isn’t still protected by a warranty.) The dryers are easy to work on, don’t have a ton of parts that can create DIY repair problems, and are easy o put back together. Remember, we have many of the parts needed to complete the work and are happy to offer tips and suggestions.

If you don’t want to tackle the repairs yourself, that’s okay to. We’re happy to step in and will send our best Baxter commercial dryer expert to your business the same day you call us. You just have to let us know how you want to proceed. 

We promise to provide you with affordable, accurate, and high quality repair work. 

When it comes to appliance repair and dryers, there’s nothing we haven’t already experienced.

Common Baxter dryer problems we routinely correct include:

• Broken door latches
• Blocked vents
• Wiring problems
• Burned out motors

We love working with all sorts of business located in and around Los Angeles. We don’t care if you use a hundred Baxter commercial appliances or if you only have one. Either way, we’re proud to call you a customer. 

We have worked with businesses that span a wide array of industries. Over the years, we’ve provided Baxter commercial appliance repairs to:

• Local Medical clinics
• Retirement communities
• Gyms
• Hospitals
• Office based business
• Athletic venues
• Resorts
• Restaurants
• Television/movie studios
• Night clubs
• Stores
• Boutiques
• Dance studios
• Factories
• Schools
• And more!

Call today and book an appointment!